3VZ-E TOYOTA ENGINE
Showing 1–40 of 51 results
 3VZ 3.0L Cylinder Head Gasket Set 88-95 ISHINO Gasket set with an OEM Head Gasket This is a 100% Japanese gasket set with the updated OEM head gasket design! We Have been using this set for years and have never had any issues. We have seen all the other gasket sets on the market and…
3VZ 3.0L Intake Plenum Gasket Genuine 88-95 1988-95 Pick-up 1988-95 4Runner 1993-94 T100 NOTE: DOES NOT FIT 3VZ-FE 4 CAMÂ Genuine Toyota Part
3VZ 3.0L Intake Plenum Gasket – OEM Toyota (1988–1995) Keep your engine sealed and running right with this OEM Toyota Intake Plenum Gasket, designed specifically for vehicles equipped with the 3VZ-E 3.0L V6 engine. This gasket seals the upper and lower intake plenum, helping prevent vacuum and coolant leaks for smooth, reliable performance. Fits: 1988–1995…
Exhaust Pipe Donut/Gasket 5VZ 3.4L (Y-Pipe to Cat) 1995-04 Tacoma 1996-02 4Runner 1995-98 T100 2000-04 Tundra 83mm OD x 70mm ID x 5mm Thick Timmy The Toolman Installs a Yota1 5VZ-FE engine. Part 1 Part 2 Part 3 Part 4
5VZ 3.4L Tail Pipe to Muffler Exhaust Donut/Gasket | Yota1 Performance Ensure a leak-free exhaust connection with this high-quality Tail Pipe to Muffler Exhaust Donut/Gasket, specifically designed for the Toyota 5VZ 3.4L V6 engine. This gasket fits snugly between the tailpipe and muffler, helping to restore proper backpressure and exhaust sealing. Applications: 1995–2004 Toyota Tacoma…
Release Bearing OEM 88-95 3VZ, 22R, 22RE, 22RTE Genuine Toyota clutch release bearings offer the conventional alignment function in a lightweight, compact body.
Release Bearing OEM 88-95 3VZ, 22R, 22RE, 22RTE Koyo clutch release bearings offer the conventional alignment function in a lightweight, compact body. 31230-35071
31410-35271
3VZ Timing Belt Kit With Water Pump 1993-1995 93-95 4Runner 93-95 Pickup 93-94 T-100 The AISIN Timing Belt Kit contains the timing belt, tensioner and deflection pulleys. All AISIN components meet the strict original equipment requirements. This kit contains a Mitsuboshi timing belt, an Aisin water pump w/ gasket, a Koyo or NSK tensioner and…
3VZ 3.0L Timing Belt Kit W/Water Pump 1988-92 Spring Tensioner (with Oil Cooler) 1988-1992 The Timing Belt Kit contains the timing belt, spring and deflection pulleys. All components meet the strict original equipment requirements. Features and Benefits: Original equipment quality Enhanced reliability for engine and vehicle owner If you are looking for the version of…
3VZ 3.0L Timing Belt Kit W/Water Pump 1988-92 Spring Tensioner (without Oil Cooler) 1988-1992 Contains a Genuine Toyota Water Pump. The Timing Belt Kit contains the timing belt, spring and deflection pulleys. All components meet the strict original equipment requirements. Features and Benefits: Original equipment quality Enhanced reliability for engine and vehicle owner If you…
This kit is discontinued by AISIN. We at Yota1 have gone ahead and made replacement kits to suit your needs. There are multiple versions of this kit, one that will fit in with an Oil Cooler (Here.) and the other kit that will fit without an Oil Cooler (Here.) AISIN 3VZ Timing Belt Kit W/…
3VZ 3.0L OEM Reconditioned Cylinder Head 88-95 1988-1992 Passenger (RIGHT) side- Spring tensioner #T120144 1993-1995 Passenger (RIGHT) side- Hydraulic tensioner (Extra bolt hole in the front for the tensioner pulley for engines that use a hydraulic tensioner rather than a spring tensioner) #T120143 1988-1995 Driver (LEFT) side #T120145 (Left Cylinder Head is modified to accept…
3VZ 3.0L Cylinder Head Bolts If you are rebuilding your engine or replacing the head gasket, you should not reuse the head bolts. Â These 3VZ Head Bolts are hand picked and are used in our machine shop everyday to build 3VZ’s.
ARP head stud kit for the 3VZ 3.0L. Here at Yota1Â Performance we feel that durability and reliability are priority #1. Which is why we are committed to the constant Research, development and testing required to provide quality products that really work. Not very many aftermarket parts surpass factory Toyota quality but ARP bolts and Studs…
Toyota Genuine Exhaust Nut This high-quality exhaust nut is designed to meet the exact specifications of Toyota, ensuring a perfect fit and optimal performance. It is a direct replacement, making it an essential component when repairing or replacing engine exhaust manifolds or exhaust system. Key Features: Direct Replacement: Designed to seamlessly replace your existing exhaust…
THIS KIT DOES NOT INCLUDE THE PIPE SECTION!
Additional Exhaust work is required.
Toyota Genuine Exhaust Stud (FOR EXHAUST MANIFOLD TO CYLINDER HEAD CONNECTION) Your exhaust hardware has had a hard life, If your replacing your cylinder head or engine it is recommended to replace the exhaust studs and nuts with these genuine Toyota parts Key Features: Direct Replacement: Designed to seamlessly replace your existing exhaust stud. Uses…
Genuine Toyota Oil Filter – 90915-YZZD1Fits 22R, 22RE, 22RTE, 2RZ, 3RZ, 3VZ, 5VZ Engines Maintain your engine’s performance and reliability with this Genuine Toyota Oil Filter (SKU: 90915-YZZD1). Designed specifically for a wide range of Toyota engines, this filter provides superior filtration and fit, ensuring long engine life and optimal oil flow. Fits the following…
FACTORY TOYOTA OIL FILTER CASE OF 10 SKU: 90915-YZZD1 FITS 22R, 22RE, 2RZ, 3RZ, 3VZ, 5VZ Toyota ENGINES Change your oil knowing you are using a Genuine Toyota Part! Need OEM spark plugs, see below Timmy The Toolman Installs a Yota1 5VZ-FE engine. Part 1 Part 2 Part 3 Part 4
3VZ Injectors OEMÂ Your Injectors have probably never been serviced, if not then they’re 20-30 years old. Replacing them with a new professionally rebuilt set will improve fuel mileage and performance. These are re-manufactured factory Toyota/Denso injectors, don’t get suckered into a crappy Chinese set for $300 plus Our re-manufactured injectors are cleaned, flow tested,…
Description 6Cyl Injector Seal Kit 3VZ 3.0L 1988-1995 These seals should be replaced anytime they are disturbed. If you have never replaced these seals it is very likely that you could have a small vacuum leak around the base of at least 1 if not all 6 injectors. The lower cushion ring is subject to…
5VZ 3.4L Ignition Wire Set Genuine Toyota 95-04 Tacoma 96-02 4Runner 95-98 T100 00-04 Tundra Genuine Toyota Part Timmy The Toolman Installs a Yota1 5VZ-FE engine. Part 1 Part 2 Part 3 Part 4
Front Crankshaft Seal Genuine 5VZ 3.4L 3VZ 3.0L 1995-04 Tacoma 1988-02 4Runner 1995-98 T100 2000-04 Tundra 1988-1995 Pickup Timmy The Toolman Installs a Yota1 5VZ-FE engine. Part 1 Part 2 Part 3 Part 4
3VZ 3.0L ARP Main Stud Kit Here at Yota1Â Performance we feel that durability and reliability are priority #1. Which is why we are committed to the constant Research, development and testing required to provide quality products that really work. ARP is defiantly high on our list of trusted companies that produce top quality products. If…
Oil Cooler Seal Kit – Toyota 3VZ 3.0L (1988–1995) Fits: 1988–1995 Toyota Pickup & 4Runner (3.0L V6) This Oil Cooler Seal Kit is designed specifically for 3VZ 3.0L engines equipped with a factory oil cooler. It includes a set of Genuine and OEM-quality gaskets to ensure proper sealing and long-lasting performance. Kit Features: Compatible with…
3VZ Oil Cooler Genuine Hose Kit Includes: Hose from thermostat housing to oil cooler Hose from oil cooler to the block
Rear Main Seal Genuine TOYOTA 5VZ 3.4L 3VZ 3.0L 1995-04 Tacoma 1988-02 4Runner 1995-98 T100 2000-04 Tundra 1988-1995 Pickup Timmy The Toolman Installs a Yota1 5VZ-FE engine. Part 1 Part 2 Part 3 Part 4
Rear Main Seal OEM 5VZ 3.4L 3VZ 3.0L 1995-04 Tacoma 1988-02 4Runner 1995-98 T100 2000-04 Tundra 1988-1995 Pickup Timmy The Toolman Installs a Yota1 5VZ-FE engine. Part 1 Part 2 Part 3 Part 4
5VZ 3.4L Lower Plenum Intake Manifold Stud Kit Genuine (4) This kit includes 4 studs. When you’re servicing or rebuilding your 5VZ 3.4L V6, don’t overlook the hardware that holds it all together. The Toyota Genuine Lower Plenum Intake Manifold Stud Kit includes four studs designed to properly secure the lower intake plenum to the…
Oil Cooler Seal Kit 5VZ 3.4L 1995-04 Tacoma 1988-02 4Runner 1995-98 T100 2000-04 Tundra 1988-1995 Pickup Timmy The Toolman Installs a Yota1 5VZ-FE engine. Part 1 Part 2 Part 3 Part 4
Oil Pressure Sending Unit SANKEI 22R/22RE/3VZ ALL 4Runner/Pickup 1981-1993 This OEM Oil Pressure Sending unit/Switch is for all 4Runners/Pickups from 81-93 that use a factory oil pressure gauge. NOTE: This is only for a factory gauge, not a “low oil pressure warning light”. Fits: 81-93 pick-up 84-93 4Runner 80-84 landcruiser 78-85 Celica 76-91 Corolla 85-89…
Spring Tensioner engine that has an Oil Cooler
Due to heavy volume, our current lead time on rebuilt engines is 9 months. This is for all Engines that will ship, be picked up or installed. Engines will ship by freight or local pickup. Any other method selected below will ship additional cart items separately from your engine. Call (209) 869-6821 for a quote to your address.
End of content
End of content
WARNING: This product can expose you to chemicals, which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov.
