Showing all 26 results
-
-
Hubs / Flanges (9)
-
Knuckle and Hub Rebuild (11)
-
Knuckles (8)
-
Steering Spindles (1)
-
Manual Hubs SWAP Steering Knuckles – PAIR – Tacoma and 4Runner / Early Tundra and Sequoia
$1,710.00 – $2,415.00Turn a troublesome wheel-bearing maintenance job into a quick knuckle swap. With the Yota1 Pre-Assembled Steering Knuckles with new KOYO wheel bearings, you can easily replace your wheel bearings without using a press.
For Manual hub swapping 4WD vehicles
**THESE SPINDLES HAVE A 1-3 DAY DAY LEAD TIME.
Does not include hub studs please select a hardware kit below to purchase hub studs if needed.
**PLEASE INCLUDE YOUR VIN IF ORDERING BACKING PLATES SO WE CAN VERIFY FITMENT. THIS CAN BE ADDED IN THE CART NOTES**
**WHEN PURCHASING THESE SPINDLES, WE ARE CUSTOM BUILDING THEM FOR YOUR VEHICLE, ONCE THE ORDER HAS BEEN PLACED, THERE IS NO CANCELATION OF THIS ORDER. THERE ARE NO EXCEPTIONS TO THIS POLICY!
Select options This product has multiple variants. The options may be chosen on the product page -
Remanufactured 2WD PreRunner Steering Knuckles Pre-Assembled – PAIR
$1,100.00 – $1,605.00Turn a troublesome wheel-bearing maintenance job into a quick knuckle swap. With the Yota1 Pre-Assembled Steering Knuckles with new KOYO wheel bearings, you can easily replace your wheel bearings without using a press.
For 6 lug 2WD or PreRunner
Fits smaller Lower Ball Joint:
Tacoma 1995-2004
4Runner 1996-2002
Tundra 1999-2004
Sequoia 2001-2004Fits Larger Lower Ball Joint:
Tundra 2005-2006
Sequoia 2005-2007**THESE SPINDLES HAVE A 3-5 DAY DAY LEAD TIME.
**PLEASE INCLUDE YOUR VIN IF ORDERING BACKING PLATES SO WE CAN VERIFY FITMENT. THIS CAN BE ADDED IN THE CART NOTES**
**WHEN PURCHASING THESE SPINDLES, WE ARE CUSTOM BUILDING THEM FOR YOUR VEHICLE, ONCE THE ORDER HAS BEEN PLACED, THERE IS NO CANCELATION OF THIS ORDER. THERE ARE NO EXCEPTIONS TO THIS POLICY!
Select options This product has multiple variants. The options may be chosen on the product page -
Remanufactured A.D.D Steering Knuckles Pre-Assembled – PAIR
$1,100.00 – $1,605.00Turn a troublesome wheel-bearing maintenance job into a quick knuckle swap. With the Yota1 Pre-Assembled Steering Knuckles with new KOYO wheel bearings, you can easily replace your wheel bearings without using a press.
For ADD 4WD hub vehicles. Also know as Auto hubs or standard hubs.
Fits smaller Lower Ball Joint:
Tacoma 1995-2004
4Runner 1996-2002
Tundra 1999-2004
Sequoia 2001-2004Fits Larger Lower Ball Joint:
Tundra 2005-2006
Sequoia 2005-2007**THESE SPINDLES HAVE A 3-5 DAY DAY LEAD TIME.
**PLEASE INCLUDE YOUR VIN IF ORDERING BACKING PLATES SO WE CAN VERIFY FITMENT. THIS CAN BE ADDED IN THE CART NOTES**
**WHEN PURCHASING THESE SPINDLES, WE ARE CUSTOM BUILDING THEM FOR YOUR VEHICLE, ONCE THE ORDER HAS BEEN PLACED, THERE IS NO CANCELATION OF THIS ORDER. THERE ARE NO EXCEPTIONS TO THIS POLICY!
Select options This product has multiple variants. The options may be chosen on the product page -
Remanufactured Manual Hubs Steering Knuckles Pre-Assembled – PAIR
$1,710.00 – $2,415.00Turn a troublesome wheel-bearing maintenance job into a quick knuckle swap. With the Yota1 Pre-Assembled Steering Knuckles with new KOYO wheel bearings, you can easily replace your wheel bearings without using a press.
For 6 lug 4WD or PreRunner
Fits smaller Lower Ball Joint:
Tacoma 1995-2004
4Runner 1996-2002
Tundra 1999-2004
Sequoia 2001-2004Fits Larger Lower Ball Joint:
Tundra 2005-2006
Sequoia 2005-2007**THESE SPINDLES HAVE A 3-5 DAY DAY LEAD TIME.
**PLEASE INCLUDE YOUR VIN IF ORDERING BACKING PLATES SO WE CAN VERIFY FITMENT. THIS CAN BE ADDED IN THE CART NOTES**
**WHEN PURCHASING THESE SPINDLES, WE ARE CUSTOM BUILDING THEM FOR YOUR VEHICLE, ONCE THE ORDER HAS BEEN PLACED, THERE IS NO CANCELATION OF THIS ORDER. THERE ARE NO EXCEPTIONS TO THIS POLICY!
Select options This product has multiple variants. The options may be chosen on the product page -
Front Axle Outer Shaft Flange Gasket Genuine
$3.86Keep your Toyota in optimal condition with the Genuine Toyota 43422-60060 Gasket, Front Axle Outer Shaft Flange. This high-quality gasket ensures a secure and reliable seal for your front axle outer shaft, preventing any unwanted leaks. Key Features: Brand: Genuine Toyota Manufacturer Part Number: 43422-60060 Part Description: Gasket, Front Axle Outer Shaft Flange, RH Other…
-
Front Axle Flange Gasket Genuine 1998-2007 Land Cruiser
$3.07Front Axle Flange Gasket Genuine 1998-2007 100 Series Land Cruiser This Flange Gasket is for the Left or Right Side The FLANGE is sold separately Genuine Toyota Part
-
Front Axle Flange Genuine 1998-2007 Land Cruiser
$95.62Front Axle Flange Genuine 1998-2007 100 Series Land Cruiser This Flange is for the Left or Right Side The GASKET is sold separately Genuine Toyota Part
-
Manual Hub Budget Aftermarket Hardware Kit
$55.95Manual Hub Budget Aftermarket Hardware Kit **Kit contains one side. Universal for both sides** Kit Includes: (6) Double Ended Stud (6) Conical Washers (6) Flat Washers (6) Hex Nuts (1) Spacer Washer (1) Snap Ring (1) Hub Gasket All IFS w/ Manual Hubs Tacoma 95-04 Tundra 96-02 4Runner 00-06 Sequoia 01-07
-
Manual Hub Budget Aftermarket Hardware Kit PAIR
$110.95Manual Hub Budget Aftermarket Hardware Kit **Kit contains both sides.** Kit Includes: (12) Double Ended Stud (12) Conical Washers (12) Flat Washers (12) Hex Nuts (2) Spacer Washer (2) Snap Ring (2) Hub Gasket Tacoma 95-04 Tundra 96-02 4Runner 00-06 Sequoia 01-07
-
Manual Hub Hardware Kit Genuine 1986-98
$89.95Manual Hub Hardware Kit Fits: 86-95 Manual Hub Pick up 86-95 4Runner 86-95 T100 93-98 Kit Includes: (6) Studs (6) Conical Washers (6) Flat Washers (6) Nuts (1) Spacer Washer (1) Hub Gasket
-
Manual Hub Hardware Kit Genuine and ARP
$149.95Manual Hub Hardware Kit Genuine and ARP One Side (6) ARP Studs (6) Lock Washers (6) Conical Washers (6) Nuts NOTE: This stud kit can be used on the 1995-2004 Tacoma with manual hubs. However, due to the short body width of the hub, the end of the stud must be modified. For proper fitment…
-
Manual Hub Hardware Kit Genuine and ARP Pair
$289.95Manual Hub Hardware Kit Genuine and ARP Pair (12) ARP Studs (12) Lock Washers (12) Conical Washers (12) Nuts NOTE: This stud kit can be used on the 1995-2004 Tacoma with manual hubs. However, due to the short body width of the hub, the end of the stud must be modified. For proper fitment the…
-
Manual Hub Hardware Kit Genuine – PAIR
$179.95Manual Hub Hardware Kit for both passenger and driver side. Kit Includes: (12) Studs (12) Conical Washers (12) Flat Washers (12) Nuts (2) Spacer Washer (2) Hub Gasket
-
Manual Hubs SWAP Steering Knuckles – PAIR – Tacoma and 4Runner / Early Tundra and Sequoia
$1,500.00 – $2,320.00Turn a troublesome wheel-bearing maintenance job into a quick knuckle swap. With the Yota1 Pre-Assembled Steering Knuckles with new KOYO wheel bearings, you can easily replace your wheel bearings without using a press.
For Manual hub swapping 4WD vehicles
**THESE SPINDLES HAVE A 1-3 DAY DAY LEAD TIME.
Does not include hub studs please select a hardware kit below to purchase hub studs if needed.
**PLEASE INCLUDE YOUR VIN IF ORDERING BACKING PLATES SO WE CAN VERIFY FITMENT. THIS CAN BE ADDED IN THE CART NOTES**
**WHEN PURCHASING THESE SPINDLES, WE ARE CUSTOM BUILDING THEM FOR YOUR VEHICLE, ONCE THE ORDER HAS BEEN PLACED, THERE IS NO CANCELATION OF THIS ORDER. THERE ARE NO EXCEPTIONS TO THIS POLICY!
Select options This product has multiple variants. The options may be chosen on the product page -
Rear Hub Bearing Assembly OEM 2005-2019 Tacoma
$285.94Rear Hub Bearing Assembly OEM Koyo 2005-2019 Tacoma Fits: LEFT AND RIGHT 2005-09/2019 Tacoma OEM Koyo Part This bearing works on both sides in the rear of the Toyota Tacoma.
-
-
-
Manual Locking Hub AISIN Tacoma 1995-2001
$144.95OEM Part Number: 43509-35040
Click here for Pre-Assembled knuckles for a quick and easy repair.
-
Manual Locking Hub AISIN Tacoma 1995-2001 PAIR
$289.90Click here for Pre-Assembled knuckles for a quick and easy repair. OEM Part Number: 43509-35040 AISIN 4WD Free Wheel Hub PAIR TOCOMA 1995-2001 43509-35040 OE Manufactured replacement hubs, compact and durable to withstand rugged terrain. This product is for one hub, if you need two, please add an additional one to your cart.
-
MANUAL HUB AISIN TOYOTA IFS 26 SPLINE 1986-1995
$125.95OEM Part Number: 43509-35030
4RUNNER 1986-1995
PICKUP 1986-1995
T100 1993-1994
VAN 1987-1989
-
-
Knuckle Stop Cover Genuine 4WD 1985-1998
$7.67Knuckle Stop Cover Genuine 4WD 1985-1998 Fits: 1985-1995 4Runner 4×4 1985-1995 Pickup 4×4 1993-1998 T100 4×4 Sold Individually Genuine Toyota Part 4×4 Has 4
-
Knuckle Stop Cover Kit Set Of 4 1985-1998 4×4 Pickup
$28.95Knuckle Stop Cover Kit Set Of 4 1985-1998 4×4 Pickup Fits: 1985-1995 4Runner 4×4 1985-1995 Pickup 4×4 1993-1998 T100 4×4
-
Front Axle LH Hub Bolt Genuine 1984-2021
$5.11Front Axle LH Hub Bolt Genuine 1984-2021 Fits: 1984-2021 4Runner 2007-2014 FJ Cruiser 1991-1997 Land Cruiser 1979-1995 Pickup 2001-2007 Sequoia 1993-1998 T100 1995-2021 Tacoma 2000-2006 Tundra Genuine Toyota Part
-
Front Knuckle Stopper Nut Genuine 1979-1995
$1.64Front Knuckle Stopper Nut Genuine 1979-1995 Fits: 1985-1995 4Runner 1979-1995 Pickup Genuine Toyota Part
-
Knuckle Stop Cover Genuine 2WD 1979-1994
$8.07Knuckle Stop Cover Genuine 2WD 1979-1994 Fits: 1984-1994 4Runner 2WD 1979-1994 Pickup 2WD Sold Individually Genuine Toyota Part 2WD has 2
End of content
End of content