Showing 1–40 of 96 results
-
-
Axle Housings (1)
-
Knuckles to Hubs (26)
-
Lockers (1)
-
2UZ 4.7L Rear Axle Bearing Retainer Genuine
$33.272UZ 4.7L Rear Axle Bearing Retainer Genuine Vehicle Fitment Details This retainer fits the following Toyota Sequoia configurations: Model Years: 2001 through 2007 Trims: Limited, SR5 Engine: 4.7L V8 (2UZ-FE) Drivetrain: Applicable to both 2WD and 4WD variants The Toyota part number 42423-34020 refers to a Rear Axle Bearing Retainer, a crucial component in the…
-
8″ E-Locker Jig Tool Drill Plate
$134.958″ E-Locker Jig Tool Drill PlateConvert Your 8″ Non E-Locker Axle Housing to Fit an E-Locker Take the guesswork out of your E-Locker retrofit with this precision 8″ E-Locker Jig Tool Drill Plate. Designed to help modify a standard, non E-Locker axle housing for use with an 8″ Toyota E-Locker third member, this tool ensures…
-
CV Axle Boot Kit Genuine 1995-2004
$77.66Genuine Toyota CV Axle Boot Kit – For A.D.D. & Manual Locking Hubs Keep your front CV axles protected and performing like new with this Genuine Toyota CV Axle Boot Kit, designed for vehicles equipped with Automatic Disconnecting Differential (A.D.D.) or manual locking hubs. This high-quality kit includes everything needed to service both the inner…
-
Genuine Toyota Remanufactured CV Axle Assembly 1995-2004
$266.00Genuine Toyota Remanufactured CV Axle Assembly Remanufactured in house by Yota1 Performance Includes genuine Toyota inner and outer CV boots This product is for A.D.D Hubs only. NOT FOR MANUAL LOCKING HUBS Fits: 1996 – 2002 4Runner 1995 – 2004 Tacoma This product has a core charge of $185.00. We will send you a return…
-
Manual Hubs SWAP Steering Knuckles – PAIR
$1,710.00 – $2,415.00Turn a troublesome wheel-bearing maintenance job into a quick knuckle swap. With the Yota1 Pre-Assembled Steering Knuckles with new KOYO wheel bearings, you can easily replace your wheel bearings without using a press.
For Manual hub swapping 4WD vehicles
**THESE SPINDLES HAVE A 1-3 DAY DAY LEAD TIME.
Does not include hub studs please select a hardware kit below to purchase hub studs if needed.
**PLEASE INCLUDE YOUR VIN IF ORDERING BACKING PLATES SO WE CAN VERIFY FITMENT. THIS CAN BE ADDED IN THE CART NOTES**
**WHEN PURCHASING THESE SPINDLES, WE ARE CUSTOM BUILDING THEM FOR YOUR VEHICLE, ONCE THE ORDER HAS BEEN PLACED, THERE IS NO CANCELATION OF THIS ORDER. THERE ARE NO EXCEPTIONS TO THIS POLICY!
Select options This product has multiple variants. The options may be chosen on the product page -
Remanufactured 2WD PreRunner Steering Knuckles Pre-Assembled – PAIR
$1,100.00 – $1,605.00Turn a troublesome wheel-bearing maintenance job into a quick knuckle swap. With the Yota1 Pre-Assembled Steering Knuckles with new KOYO wheel bearings, you can easily replace your wheel bearings without using a press.
For 6 lug 2WD or PreRunner
Fits smaller Lower Ball Joint:
Tacoma 1995-2004
4Runner 1996-2002
Tundra 1999-2004
Sequoia 2001-2004Fits Larger Lower Ball Joint:
Tundra 2005-2006
Sequoia 2005-2007**THESE SPINDLES HAVE A 3-5 DAY DAY LEAD TIME.
**PLEASE INCLUDE YOUR VIN IF ORDERING BACKING PLATES SO WE CAN VERIFY FITMENT. THIS CAN BE ADDED IN THE CART NOTES**
**WHEN PURCHASING THESE SPINDLES, WE ARE CUSTOM BUILDING THEM FOR YOUR VEHICLE, ONCE THE ORDER HAS BEEN PLACED, THERE IS NO CANCELATION OF THIS ORDER. THERE ARE NO EXCEPTIONS TO THIS POLICY!
Select options This product has multiple variants. The options may be chosen on the product page -
Remanufactured A.D.D Steering Knuckles Pre-Assembled – PAIR
$1,100.00 – $1,605.00Turn a troublesome wheel-bearing maintenance job into a quick knuckle swap. With the Yota1 Pre-Assembled Steering Knuckles with new KOYO wheel bearings, you can easily replace your wheel bearings without using a press.
For ADD 4WD hub vehicles. Also know as Auto hubs or standard hubs.
Fits smaller Lower Ball Joint:
Tacoma 1995-2004
4Runner 1996-2002
Tundra 1999-2004
Sequoia 2001-2004Fits Larger Lower Ball Joint:
Tundra 2005-2006
Sequoia 2005-2007**THESE SPINDLES HAVE A 3-5 DAY DAY LEAD TIME.
**PLEASE INCLUDE YOUR VIN IF ORDERING BACKING PLATES SO WE CAN VERIFY FITMENT. THIS CAN BE ADDED IN THE CART NOTES**
**WHEN PURCHASING THESE SPINDLES, WE ARE CUSTOM BUILDING THEM FOR YOUR VEHICLE, ONCE THE ORDER HAS BEEN PLACED, THERE IS NO CANCELATION OF THIS ORDER. THERE ARE NO EXCEPTIONS TO THIS POLICY!
Select options This product has multiple variants. The options may be chosen on the product page -
Remanufactured Manual Hubs Steering Knuckles Pre-Assembled – PAIR
$1,710.00 – $2,415.00Turn a troublesome wheel-bearing maintenance job into a quick knuckle swap. With the Yota1 Pre-Assembled Steering Knuckles with new KOYO wheel bearings, you can easily replace your wheel bearings without using a press.
For 6 lug 4WD or PreRunner
Fits smaller Lower Ball Joint:
Tacoma 1995-2004
4Runner 1996-2002
Tundra 1999-2004
Sequoia 2001-2004Fits Larger Lower Ball Joint:
Tundra 2005-2006
Sequoia 2005-2007**THESE SPINDLES HAVE A 3-5 DAY DAY LEAD TIME.
**PLEASE INCLUDE YOUR VIN IF ORDERING BACKING PLATES SO WE CAN VERIFY FITMENT. THIS CAN BE ADDED IN THE CART NOTES**
**WHEN PURCHASING THESE SPINDLES, WE ARE CUSTOM BUILDING THEM FOR YOUR VEHICLE, ONCE THE ORDER HAS BEEN PLACED, THERE IS NO CANCELATION OF THIS ORDER. THERE ARE NO EXCEPTIONS TO THIS POLICY!
Select options This product has multiple variants. The options may be chosen on the product page -
Creeper Axle Housing Breather Kit
$34.95Trail Gear Creeper Axle Housing Breather KitEasy Installation – Protects Your Axle Housing from Debris, Water, and Dirt Keep your axle housing clean and functioning at its best with the Trail Gear Creeper Axle Housing Breather Kit. Designed to fit both front and rear axles, this kit helps maintain proper pressure in your axle housing…
-
SUMO Knuckle Rebuild Kit Land Cruiser 1975-1979
$103.95SUMO GEAR Knuckle Rebuild Kit, Fits 40 Series 1975-1979 Land Cruiser This kit comes with axle nut kit, front wheel oil seal, axle shaft oil seal, front axle gasket kit, knuckle bearings and star gaskets.
-
Front Axle Outer Shaft Flange Gasket Genuine
$3.86Keep your Toyota in optimal condition with the Genuine Toyota 43422-60060 Gasket, Front Axle Outer Shaft Flange. This high-quality gasket ensures a secure and reliable seal for your front axle outer shaft, preventing any unwanted leaks. Key Features: Brand: Genuine Toyota Manufacturer Part Number: 43422-60060 Part Description: Gasket, Front Axle Outer Shaft Flange, RH Other…
-
Front Axle Flange Gasket Genuine 1998-2007 Land Cruiser
$3.07Genuine Toyota Front Axle Flange Gasket – Left or Right Side (1998–2007 Land Cruiser 100 Series) Ensure a proper seal and prevent leaks in your front axle assembly with this Genuine Toyota front axle flange gasket, designed specifically for 100 Series Land Cruisers. This gasket fits either the driver or passenger side and is engineered…
-
Front Axle Flange Genuine 1998-2007 Land Cruiser
$95.62Genuine Toyota Front Axle Flange – Left or Right Side (1998–2007 Land Cruiser 100 Series) Restore proper function to your front axle assembly with this Genuine Toyota front axle flange, engineered for precise fit and durability on 100 Series Land Cruisers. Designed to fit either the left or right front axle, this flange ensures secure…
-
Manual Hub Budget Aftermarket Hardware Kit
$55.95Manual Hub Budget Aftermarket Hardware Kit **Kit contains one side. Universal for both sides** Kit Includes: (6) Double Ended Stud (6) Conical Washers (6) Flat Washers (6) Hex Nuts (1) Spacer Washer (1) Snap Ring (1) Hub Gasket All IFS w/ Manual Hubs Tacoma 95-04 Tundra 96-02 4Runner 00-06 Sequoia 01-07
-
Manual Hub Budget Aftermarket Hardware Kit PAIR
$110.95Manual Hub Budget Aftermarket Hardware Kit **Kit contains both sides.** Kit Includes: (12) Double Ended Stud (12) Conical Washers (12) Flat Washers (12) Hex Nuts (2) Spacer Washer (2) Snap Ring (2) Hub Gasket Tacoma 95-04 Tundra 96-02 4Runner 00-06 Sequoia 01-07
-
Manual Hub Hardware Kit Genuine 1986-98
$89.95Manual Hub Hardware Kit Fits: 86-95 Manual Hub Pick up 86-95 4Runner 86-95 T100 93-98 Kit Includes: (6) Studs (6) Conical Washers (6) Flat Washers (6) Nuts (1) Spacer Washer (1) Hub Gasket
-
Manual Hub Hardware Kit Genuine and ARP
$149.95Manual Hub Hardware Kit Genuine and ARP One Side (6) ARP Studs (6) Lock Washers (6) Conical Washers (6) Nuts NOTE: This stud kit can be used on the 1995-2004 Tacoma with manual hubs. However, due to the short body width of the hub, the end of the stud must be modified. For proper fitment…
-
Manual Hub Hardware Kit Genuine and ARP Pair
$289.95Manual Hub Hardware Kit Genuine and ARP Pair (12) ARP Studs (12) Lock Washers (12) Conical Washers (12) Nuts NOTE: This stud kit can be used on the 1995-2004 Tacoma with manual hubs. However, due to the short body width of the hub, the end of the stud must be modified. For proper fitment the…
-
Manual Hub Hardware Kit Genuine – PAIR
$179.95Manual Hub Hardware Kit for both passenger and driver side. Kit Includes: (12) Studs (12) Conical Washers (12) Flat Washers (12) Nuts (2) Spacer Washer (2) Hub Gasket
-
Rear Axle Shaft Seal Genuine 1993-1997 Land Cruiser
$6.88Genuine Toyota Rear Axle Shaft Seal – 1993–1997 Land Cruiser Maintain your Land Cruiser’s rear axle integrity with this Genuine Toyota Rear Axle Shaft Seal, engineered to prevent gear oil leaks and protect internal axle components from dirt and moisture. Designed for a precise factory fit, this seal is essential for ensuring long-lasting differential and…
-
Rear Hub Bearing Assembly OEM 2005-2019 Tacoma
$285.94Rear Hub Bearing Assembly – OEM Koyo (2005–09/2019 Toyota Tacoma, Left & Right) Restore smooth, reliable performance to your Tacoma with this OEM Koyo Rear Hub Bearing Assembly, designed to fit both the left and right sides of the rear axle on 2005 through 09/2019 Toyota Tacoma models. Manufactured to original equipment standards, this bearing…
-
-
-
Manual Locking Hub AISIN Tacoma 1995-2001
$144.95OEM Part Number: 43509-35040
Click here for Pre-Assembled knuckles for a quick and easy repair.
-
Manual Locking Hub AISIN Tacoma 1995-2001 PAIR
$289.90Click here for Pre-Assembled knuckles for a quick and easy repair. OEM Part Number: 43509-35040 AISIN 4WD Free Wheel Hub PAIR TOCOMA 1995-2001 43509-35040 OE Manufactured replacement hubs, compact and durable to withstand rugged terrain. This product is for one hub, if you need two, please add an additional one to your cart.
-
MANUAL HUB AISIN TOYOTA IFS 26 SPLINE 1986-1995
$125.95OEM Part Number: 43509-35030
4RUNNER 1986-1995
PICKUP 1986-1995
T100 1993-1994
VAN 1987-1989
-
SUMO GEAR Knuckle Rebuild Kit, Fits 80 Series 1990-1997 Land Cruiser
$295.95SUMO GEAR Knuckle Rebuild Kit, Fits 80 Series 1990-1997 Land Cruiser Includes KOYO trunnion and wheel bearings Fits: 1990-1997 Land Cruiser
-
-
Front Wheel Bearing With ABS Genuine 2004-2019 Tacoma
$225.12Front Wheel Bearing With ABS Genuine 2004-2019 Tacoma Front Left and Right Fits: 09/2004-09/2019 Tacoma Genuine Toyota Part
-
Front Wheel Bearing Assembly Without Hub NSK 2003-2021
$150.94Front Wheel Bearing Assembly Without Hub NSK 2003-2021 Fits: 2005-2021 Tacoma 2003-2021 4Runner Â
-
-
-
Koyo Wheel Bearing Rear Left 2003-2019
$140.00Koyo Wheel Bearing Rear Left 2003-2019 Fits: 2003-08/2019 4Runner 2007-07/2014 FJ Cruiser
-
Rear Right Wheel Bearing Assembly Genuine Tundra 2010-2019
$467.42Rear Right Wheel Bearing Assembly Genuine Tundra 2010-2019 Fits: 04/2010-07/2019 Tundra Genuine Toyota Part
-
Rear Wheel Bearing Genuine 2000-2006
$105.19Toyota Rear Wheel Bearing – Rear AxleFits: 2000–2006 Toyota 4Runner 2000–2006 Toyota Tacoma 1998 Toyota T100 2000–2006 Toyota Tundra Restore smooth performance and reliability with this Genuine Toyota Rear Wheel Bearing. Designed specifically for rear axle applications, this OEM part ensures factory fit, quiet operation, and long-lasting durability—just like your Toyota was built for. Authentic…
-
KOYO Drive Axle Shaft Bearing 1985-1998
$79.95KOYO Drive Axle Shaft Bearing Fits: 08/1985-11/1995 Pickup 08/1985 -11/1995 4Runner 1993-1998 T100 This is an OEM Replacement Bearing for the Differential Side Gear Shaft.
-
SKF Drive Axle Shaft Bearing 1985-1998
$59.95SKF Drive Axle Shaft Bearing Fits: 08/1985-11/1995 Pickup 08/1985 -11/1995 4Runner 1993-1998 T100 This is an OEM Replacement Bearing for the Differential Side Gear Shaft. 90369-36009 83B169ACS63
-
-
Wheel Bearing Front Inner OEM 1975-1995
$51.45Wheel Bearing Front Inner OEM 1975-1995 Fits: 1975-1995 Pickup
-
Wheel Bearing Outer KOYO 1975-2007
$56.11Wheel Bearing Outer KOYO 1975-2007 Fits: 1984-1995 4Runner 1975-2007 Land Cruiser 1979-1995 Pickup 1993-1998 T100 SKU 90080-36067
End of content
End of content