Showing 1–40 of 57 results
-
-
Exhaust Kits (5)
-
Exhaust Manifolds (13)
-
Flanges and Hardware (6)
-
Headers (10)
-
O2 Sensor (4)
-
LCE Street Header Kit 2RZ 1995-2004 50 State Legal up to 1999 (50 State Legal 1995 – 1999)
$578.40This is the highest quality Stainless Steel Header for your 2RZ engine. The long tube design of this header is the best for horsepower and torque. The header kit for the 2RZ is made from 1-5/8″ 304 stainless steel tubing, 16-gauge .065 wall, and feature 1/2″ thick flanges at the head and 3/8″ thick flanges…
-
LCE Street Header Kit 2WD Direct Fit 22R/RE 1982-1984 (50 State Legal)
$630.12Whether your truck is bone stock or built for extra performance, the LC Engineering Street Header is the “best bang for your buck” bolt-on part you can buy. You should expect to see a 10-15% power increase with a good boost to the top-end of the powerband where these trucks struggle. With so many choices…
-
LCE Street Header Kit 2WD Direct Fit 22R/RE 1985-1995 (47 State Legal)
$630.12Whether your truck is bone stock or built for extra performance, the LC Engineering Street Header is the “best bang for your buck” bolt-on part you can buy. You should expect to see a 10-15% power increase with a good boost to the top-end of the powerband where these trucks struggle. With so many choices…
-
LCE Street Header Kit 3RZ Tacoma 1995-2004 Single Cat. ONLY (50 State Legal up to 1999)
$572.83This high-quality header is a long tube design to get the most horsepower for your Tacoma. There are other headers on the market, but none will come close to the LC Engineering long tube in terms of horsepower and torque gains. This header kit will come with new OE the gaskets needed for install. All…
-
LCE Street Header Kit 4WD Direct Fit 22R/RE 1985-1995
$630.12(50 State Legal C.A.R.B. EO: D-462-1) Whether your 1985-1995 Toyota truck is bone stock or built for extra performance, the LC Engineering Street Header for 22R/RE engines is the “best bang for your buck” bolt-on part you can buy. You should expect to see a 10-15% power increase with a good boost to the top…
Select options This product has multiple variants. The options may be chosen on the product page -
LCE Street Header Kit 5VZ Tacoma & 4Runner (w/o Crossover)
$801.99We are proud to announce our new Street Header Kits for the 1996-2002 Toyota 4Runners & 1996-2004 Tacoma’s with 3.4L 5VZ engines. Manufactured to the same high standards as our 22R/RE and 2RZ/3RZ Street Headers, these headers are constructed using all stainless-steel tubing, 16-gauge .065 wall, and 1/2″ thick flanges. After welding, they are ceramic…
-
Sale!
22R 22RE 2.4L Performance Header 81-95 4X4 with Exhaust Hardware and Remflex Gasket
$726.87Original price was: $726.87.$699.95Current price is: $699.95.22R 22RE Performance Header with 1/2″ flange, polished stainless steel primary tubes and fully tig welded. Our 22R 22RE Performance Header is not only the best looking header on the market, It also out performs all other headers. The 1/2″ thick flange is CNC surfaced after the 1/16″ polished stainless steel primary tubes are tig…
-
22R 22RE 2.4L Exhaust Manifold Kit Late 1985-1995
$174.94Exhaust Manifold Kit w/ Gasket 22R Late 1985-95 Toyota Pickup and 4Runner 22R and 22RE This kit includes an Exhaust Manifold with Heat Shield, & Exhaust Gasket.
-
22R 2.4L Exhaust Manifold Gasket 81-84 22R Carb (round port)
$40.86OEM Exhaust Manifold Gasket
81-84 22R Carb (round port)
-
Remflex 7010 Exhaust Manifold Gasket 22R, 22RE, 22REC 85-95
$34.95Remflex Exhaust Gasket 7010 Toyota L4 2.4L 22R, 22RE, 22REC 1985-95 1-7/16″ x 2- 3/8″ Egg Shaped Port (7 piece EGR and Air Injection Gasket Assortment Included), Manifold Applications ONLY! 8 pc Set Remflex Exhaust Gaskets are soft and compressible so the suggested torque for each gasket, which is generally much lower than factory torque, is…
-
22RTE 2.4L Exhaust Manifold Gasket (Turbo)
$39.95Exhaust Manifold Gasket 22RTE 2.4L (Turbo) This is a genuine OEM Toyota part #17173-35071 DOES NOT FIT 22R OR 22REÂ
-
22RE 2.4 Exhaust Manifold Gasket Genuine 1985-1995
$65.0222RE 2.4 Exhaust Manifold Gasket 1985-1995Â Fits: 1985-1995 4Runner 22RE 2.4L 1984-1995 08/1984 Pickup 22RE 2.4L Genuine Toyota Part
-
Remflex 7004 Exhaust Gasket Set 3VZ 3.0L
$32.85Toyota 3VZ 3.0L Engine V6 1988-95 1-9/32″ x 1-27/32″ Oval Port, Header & Manifold Applications 2/Set Remflex 7004 Exhaust Gaskets are soft and compressible so the suggested torque for each gasket, which is generally much lower than factory torque, is listed on the back of each package. Remflex is made in the USA so as to…
-
22RE 2.4L Exhaust Manifold Gasket 1985-1995 (Pear Ports)
$40.00Exhaust Manifold Gasket 85 – 95 22RE Cylinder Head with Pear Shape Exhaust ports This is an OEM Toyota gasket.
-
22R 2.4L 22RE 2.4L Exhaust Donut Gasket 1979-1995
$5.9522R 2.4L 22RE 2.4L Exhaust Donut Gasket 1979-1995 Fits: 1979-1995 Pickup 22R 2.4L 22RE 2.4L 1984-1995 4Runner 22R 2.4L 22RE 2.4L 90917-06038
-
5VZ 3.4L Exhaust Pipe Donut/Gasket
$14.88Exhaust Pipe Donut/Gasket 5VZ 3.4L (Y-Pipe to Cat) 1995-04 Tacoma 1996-02 4Runner 1995-98 T100 2000-04 Tundra 83mm OD x 70mm ID x 5mm Thick Timmy The Toolman Installs a Yota1 5VZ-FE engine. Part 1 Part 2 Part 3 Part 4
-
Exhaust Donut/ Sealing Ring 22R Series Rock Ripper Header
$4.95Exhaust Donut/ Sealing Ring 22R Series Rock Ripper Header This is the replacement gasket for the 22R Series Rock Ripper Headers.
-
1FZ 4.5L Exhaust Gasket Donut Genuine 1993-1997
$21.061FZ 4.5L Exhaust Gasket Donut Genuine 1993-1997 Fits: 1993-1997 Land Cruiser 1FZ 4.5L Genuine Toyota Part
-
Remflex 7003 Header Gasket 20R 22R 1975-1995
$35.87Remflex 7003 Header Gasket Toyota 2.2L 20R, 2.4L 22R 1975-1995 1-9/16″ Dia. Round Port 7 pc. EGR & AIR INJECTION Gasket Assortment included 8 pc Set Remflex 7003 Exhaust Gaskets are soft and compressible, so the suggested torque for each gasket, which is generally much lower than factory torque, is listed on the back of each…
-
Oxygen Sensor and EGR Stud Genuine 1981-1991
$1.13Oxygen O2 Sensor Stud (on pipe) EGR Stud 29mm 8mm/3mm/18mm 8mm x 1.25 Fits: 1984-1991 4Runner 22R 2.4L 22RE 2.4L 22RTE 2.4L 1981-1991 Pickup 22R 2.4L 22RE 2.4L 22RTE 2.4L Genuine Toyota Part
-
EGR Delete Plate with Air Injection Kit 1985-1995 EFI 22RE
$43.95EGR Delete Plates with Air Injection Kit 1985-1995 EFI 22RE This complete kit allows you to eliminate the EGR valve and Air Injection on your 85-95 EFI 22RE Engine. The EGR Plates are aluminum and the air injection plates are steel. This kit includes bolts with integrated washers and air injection gaskets. These plates can…
-
22RE 2.4L Remflex Exhaust Gasket
$35.8722RE 2.4L Remflex Exhaust Gasket 1-11/32″ x 1-25/32″ Egg Shaped Port, Header & Manifold Applications Remflex 7002 Exhaust Gaskets are soft and compressible so the suggested torque for each gasket, which is generally much lower than factory torque, is listed on the back of each package. Remflex is made in the USA so as to…
-
EXHAUST HARDWARE KIT 1975-1984 20R/22R ( WITH STOCK MANIFOLD )
$49.95If your rebuilding a 1975-84 20/22R motor and need exhaust manifold studs, we have the kit for you. Don’t waste time buying each part individually. We did the work for you!!
-
EXHAUST HARDWARE STUD KIT 1975-1984 20R/22R WITH HEADER
$40.95If you’re rebuilding a 1975-84 20R/22R engine and need exhaust studs and nuts for a header, we have the kit for you. Don’t waste time buying each part individually. We did the work for you!!
AS ALWAYS All OEM parts
-
EXHAUST HARDWARE KIT 1985-1995 (with header and 22RTE)
$53.95Exhaust Manifold Hardware Kit (9 studs & 9 nuts) Your Exhaust hardware has most likely had a hard life. These are updated OEM studs and nuts that have a #8 inverted torx tip for easy installation. If you’re replacing/rebuilding the head or engine this Exhaust Manifold Hardware Kit is a must have. This kit is for…
-
22RTE 2.4L COPPER EXHAUST LOCKNUT KIT
$7.95Copper Exhaust Locknut Kit M10-1.25 Copper This is hardware for a 22RTE 2.4L Turbo Manifold. Kit includes these OEM parts: 4 Locking nuts
-
2RZ 2.4L 3RZ 2.7L Exhaust Manifold 1995-2001
$210.152RZ 2.4L 3RZ 2.7L Exhaust Manifold 1995-2001 Fits: 1995-1999 4Runner 3RZ 2.7L 1995-1999 Tacoma 2RZ 2.4L 3RZ 2.7L 1994-1998 T100 3RZ 2.7L 2000-2001 Tacoma 2RZ 2.4L 3RZ 2.7L (Not California Compliant) 2000 4Runner 3RZ 2.7L (Not California Compliant)
-
2RZ 2.4L 3RZ 2.7L Remflex Exhaust Gasket Tacoma
$30.002RZ 2.4L 3RZ 2.7L Remflex Exhaust Gasket Tacoma 1-3/4″ x 1-17/32″ Oval Port, Header & Manifold Applications Remflex 7005 Exhaust Gaskets are soft and compressible so the suggested torque for each gasket, which is generally much lower than factory torque, is listed on the back of each package. Remflex is made in the USA so…
-
2RZ 2.7L Exhaust Gasket Donut 1999-2004
$12.122RZ 2.7L Exhaust Gasket Donut 1999-2004 Fits: 1999-2004 Tacoma 2RZ 2.7L
-
2RZ 2.4L 3RZ 2.7L Exhaust Gasket Donut 1995-2004
$5.952RZ 2.4L 3RZ 2.7L Exhaust Gasket Donut 1995-2004 Fits: 1995-2004 Tacoma 2RZ 2.4LÂ 3RZ 2.7L 43.20mm ID 58.07mm OD 90917-06039
-
Exhaust Nut Toyota Engines Genuine
$2.95Toyota Genuine Exhaust Nut This high-quality exhaust nut is designed to meet the exact specifications of Toyota, ensuring a perfect fit and optimal performance. It is a direct replacement, making it an essential component when repairing or replacing engine exhaust manifolds or exhaust system. Key Features: Direct Replacement: Designed to seamlessly replace your existing exhaust…
-
5VZ 3.4L EXHAUST HARDWARE KIT 12 Studs 12 Nuts
$69.95Description Exhaust Manifold Hardware Kit (12 studs & 12 nuts) Your Exhaust hardware has most likely had a hard life. These are updated OEM studs and nuts that have a #8 inverted torx tip for easy installation. If you’re replacing/rebuilding the head or engine this Exhaust Manifold Hardware Kit is a must have. This kit applies…
-
3VZ 3.0L Exhaust Crossover Delete Kit 1988-1995
$94.953VZ 3.0L Exhaust Crossover Delete Kit This Kit deletes the Exhaust crossover pipe found on the 3VZ 3.0L, It will eliminate the hot spot that is created at the #6 cylinder. The factory crossover pipe’s flawed design is the main cause of the notorious cylinder #6 head gasket failure that sends tons of 3VZ pick-ups…
-
Exhaust Flange Kit 2 1/4 Inch Toyota
$34.952 1/4 Inch Exhaust Flange Kit Toyota Includes Hardware and a Seal Ring
-
5VZ 3.4L 3VZ 3.0L Exhaust Hardware Kit 12 Studs, 21 Nuts
$89.95Description Exhaust Manifold Hardware Kit (12 studs & 21 nuts) Your Exhaust hardware has most likely had a hard life. These are updated OEM studs and nuts that have a #8 inverted torx tip for easy installation. If you’re replacing/rebuilding the head or engine this Exhaust Manifold Hardware Kit is a must have. This kit has…
-
Exhaust Stud Toyota Engines Genuine
$3.76Toyota Genuine Exhaust Stud (FOR EXHAUST MANIFOLD TO CYLINDER HEAD CONNECTION) Your exhaust hardware has had a hard life, If your replacing your cylinder head or engine it is recommended to replace the exhaust studs and nuts with these genuine Toyota parts Key Features: Direct Replacement: Designed to seamlessly replace your existing exhaust stud. Uses…
-
Exhaust Pipe Bolt Genuine 2003-2021
$6.03Exhaust Pipe Bolt Genuine 2003-2021 Fits: 2003-2021 4Runner 2007-2014 FJ Cruiser 2008-2021 Land Cruiser 2005-2021 Tacoma 2004-2006 Tundra Genuine Toyota Part
-
EXHAUST HARDWARE KIT 1985-95 ( WITH STOCK MANIFOLD )
$56.95 EXHAUST STUD KIT 1985-95 ( WITH STOCK MANIFOLD ) If you’re rebuilding a 1985-95 22R/RE motor and need exhaust studs, we have the kit for you. Don’t waste time buying each part individually. We did the work for you!! This Exhaust Stud kit is for 85-95 22R/RE with a stock exhaust manifold.  It also includes 3 extra nuts for…
-
Exhaust Pipe Spring Genuine 2003-2021
$6.49Exhaust Pipe Spring Genuine 2003-2021 Fits: 2003-2012 4Runner 2005-2021 Tacoma Genuine Toyota Part
-
2 Bolt Coped Oxygen Sensor Flange
$34.95Toyota 2 Bolt Coped O2 Sensor Flange, Weld On Works well with 1 3/4″Â and up pipe Includes 2 new mounting studs 8MM X 1.25 X 25MM Install using a 4mm Allen
End of content
End of content