5VZ 3.4L EXHAUST HARDWARE KIT 12 Studs 12 Nuts

Description

Description

Exhaust Manifold Hardware Kit (12 studs & 12 nuts)

Your Exhaust hardware has most likely had a hard life. These are updated OEM studs and nuts that have a #8 inverted torx tip for easy installation. If you’re replacing/rebuilding the head or engine this Exhaust Manifold Hardware Kit is a must have.

This kit applies if you are only replacing the hardware that attaches the exhaust manifold to both 5VZ heads.

We recommend kit T120767 (12 & 21) if you are replacing all the nuts. The 12/21 kit adds 9 more nuts (all new nuts for the cross over pipe). We don’t recommend replacing the 3 studs at the back of each exhaust manifold or the 3 at the bottom of the cross over pipe. If any of those studs are damaged or come out with the nut, only replace those. It is a very difficult location and that is why we recommend you not replace if not needed.

Stud – 10mm x 50mm long with #8 inverted torq tip

Nut – 10m Lock Nut