Showing 1–40 of 157 results
-

$49.87
Fuel Filter  Factory Fits: 08/1984-11/1995 4Runner 22RE 2.4L 08/1984-11/1995 Pickup 22RE 2.4L This is a tricky part to get to. So if you are doing a cylinder head or engine replacement, it is highly recommended that you replace your fuel filter! If you don’t have any history of it being replaced, do it! Factory Toyota…
-

$29.95
Bosch Fuel Filter  22RE PU/4R 1985-95 EFI This is a tricky part to get to. So if you are doing a cylinder head or engine replacement, it is highly recommended that you replace your fuel filter! If you don’t have any history of it being replaced, do it! This Filter comes with 4 copper…
-

From: $649.95
Cylinder Head 22R/RE 1985-95 Stock Replacement  NEW complete cylinder head with all new quality parts, So this is absolutely not your typical “$299 new head”. We start with a new quality cylinder head casting and add all the goodies to create a top of line cylinder head that anyone would be proud to own! This cylinder head is…
-

From: $1,049.95
**THERE IS A 1-2 WEEK LEAD TIME ON THIS PRODUCT**
-

$459.00
22RTE Turbo Cylinder Head NEW (Bare) This is a new bare casting with a CNC machined Turbo combustion chamber Chamber volume is 62cc. Need a Complete 22RTE Cylinder Head? See Below
-


$799.95
This cylinder head does NOT include a camshaft.
-

$174.94
Exhaust Manifold Kit w/ Gasket 22R Late 1985-95 Toyota Pickup and 4Runner 22R and 22RE This kit includes an Exhaust Manifold with Heat Shield, & Exhaust Gasket.
-

From: $165.95
22RTE Cylinder Head Gasket Set 1985-1988 We have designed a 22RTE Cylinder Head Gasket Set 1985-1988 and they are ALL OEM. We have seen every “complete” engine gasket and head gasket set on the market, most appear to be made from a “recycled toilet paper” looking substance, and even the quality sets are very incomplete. Here…
-

$224.95
22RE Cometic / OEM Head Gasket Set EFI 85-95 Yota1 has designed a Head Gasket Set just for you! We have hand picked Every single gasket in this set and they are ALL OEM (except Cometic Head Gasket) We have seen every “complete” engine gasket and head gasket set on the market, most appear to…
-


$199.95
Valve Cover Kit, 22RE, fits 85-95 Includes: Powder-coated Valve Cover with removable baffle 2 Yota1 Half Moons Yota1 Billet Aluminum Oil Cap 4-Grommets Valve Cover Gasket 4-Valve Cover Nuts (new OEM) IF YOU ARE RUNNING A DUAL ROW TIMING SET THERE IS A MINOR MODIFICATION REQUIRED TO THE BAFFLE. THERE WILL BE A FLYER INCLUDED…
-


$4.15
YOTA1® Valve Cover Decal Need a new sticker to complete your Toyota Valve Cover? Look no further! Here is our decal of high quality Heat Resistant Sticker for a great price!!!
-


$95.00 – $110.00
22R 22RE Valve Cover 1985-1995 $95.00 WE START BY THOROUGHLY INSPECTING THE COVERS FOR CRACKS AND DAMAGED THREADS. THEY ARE THEN CLEANED IN THE JET WASH CABINET, THEN HEAD TO OUR CNC MILL TO GET THE BAFFLE REMOVED, NEW HOLES DRILLED AND TAPPED. NOW THAT THE MILLING PROCESS IS COMPLETE, THEY TAKE THE SHORT RIDE…
-

$29.95
Billet Half Moon Set This Billet Half Moon Set is designed to replace the original rubber half moons at the front and back of the head. Â The old half moons always leak and we just can’t have that! These are guaranteed not to leak and they look awesome! Due to variations between the many different…
-

$29.95
Billet Half Moon Set This Billet Half Moon Set is designed to replace the original rubber half moons at the front and back of the head. The old half moons always leak and we just can’t have that! These are guaranteed not to leak and they look awesome! Due to variations between the many different…
-

From: $98.95
We use this gasket with ARP studs on all of our stage 3, 4, and 5 engines. Why? Cause there’s nothing better. When you get tired of replacing the head gasket on your R series engine, try this. Cometic MLS (Multi Layer Steel) Toyota  22R 2.4L 81-95 ( EFI , Carb and Turbo) Bore 95mm…
-

$34.95
Remflex Exhaust Gasket 7010 Toyota L4 2.4L 22R, 22RE, 22REC 1985-95 1-7/16″ x 2- 3/8″ Egg Shaped Port (7 piece EGR and Air Injection Gasket Assortment Included), Manifold Applications ONLY! 8 pc Set Remflex Exhaust Gaskets are soft and compressible so the suggested torque for each gasket, which is generally much lower than factory torque, is…
-

$40.00
Exhaust Manifold Gasket 85 – 95 22RE Cylinder Head with Pear Shape Exhaust ports This is an OEM Toyota gasket.
-

$59.95
Stock Reman EGR Cooler Plate 22R & 22RE The passage way in yours is probably clogged and the surface is likely pitted. This stock reman plate guarantees good EGR flow and a proper sealing surface. THIS ITEM HAS BEEN CLEANED, SAND BLASTED, SURFACED AND PAINTED GLOSS BLACK. Click here, if you’re interested in the EGR…
-


$22.95
EGR Delete Plate Kit 1985-1995 EFI 22RE This kit allows you to eliminate the EGR valve on your 85-95 EFI 22RE Engine. This kit includes bolts with integrated washers. Gaskets can be added on to this item if you need them, please choose the option. This item is not intended for Emission controlled Vehicles. Always…
-


$12.95
EGR Delete Block Plate (Side of Cylinder Head)Â 1981-1995 22R/RE Fits Carbureted and EFI engines This Kit INCLUDES Hardware This item is not intended for Emission controlled Vehicles. Always check your emission laws and regulations. This kit is for off-road and testing purposes only.
-

$12.95
EGR Delete Plate, Manifold Side, EFI ONLY 1985-1995 22RE This EGR block plate fits the EFI intake manifold on all 22RE engines. This plate fits on the back of the intake plenum and comes with the bolts and washers needed for installation. This kit includes bolts with integrated washers. If you’re interested in the full EGR…
-


$31.95
EGR Cooler Block Plate (Back of head) 20R, 22R & 22RE This plate eliminates the EGR cooler on the back of the head. These look so cool, you know you want one! Hell, get two! This plate comes with bolts. This block plate kit does not include a gasket. If you would like to purchase…
-

$28.10
20R 22R 22RE 22RTE 2.4L Valve Cover Gasket 1978-1995 Genuine Toyota 1984-11/1995 4Runner 08/1978-11/1995 Pick/Hilux 08/1978-11/1982 Celica Includes: 1- Valve Cover Gasket
-

$96.95
22R 22RE 22RTE EFI & CARB Valve Cover Gasket Set Genuine 85-95 22RE Includes: 1- Valve Cover Gasket 4- Grommets 2- Rubber Half moons 1-PCV Grommet Genuine Toyota Parts
-

$9.95
OEM Intake Manifold Gasket Lower 22R, 22RE, 22RTE Another quality OEM gasket from Yota1. Don’t risk using cheap aftermarket gaskets, OEM gaskets provide decades of reliable service.
-

$99.95
22RE Master Intake Rebuild Kit Yota1 has done it again! We created the “22RE Master intake rebuild kit” kit just for you!  This kit includes everything you will need to rebuild a 22RE intake system.  ALL parts are factory Toyota,  you simply can not find a higher quality or more thorough kit!  Whether your installing a…
-


$19.95
Cold Start Injector Delete Kit Fits 1983-95 Toyota 22REÂ EFI ONLY This Item is not intended for Emission controlled Vehicles
-


$11.67
Transmission Input Seal (Toyota Land Cruiser 3 & 4 Speed 1969-1987) Genuine TOYOTA Oil Seal for Transmission Front Bearing Retainer Landcruiser 1969-1987 L6 This is an Genuine Transmission Input Seal Land Cruisers with the following Engines F 3.9L 2F 4.2L B 3.0L Diesel 3B 3.4L Diesel
-


$29.95
KOYO Release Bearing OEM 81-89 22R, 22RE, 22RTE Koyo clutch release bearings offer the conventional alignment function in a lightweight, compact body.
-


$120.04
Release Bearing OEM 88-95 3VZ, 22R, 22RE, 22RTE Genuine Toyota clutch release bearings offer the conventional alignment function in a lightweight, compact body.
-


$39.95
Release Bearing OEM 88-95 3VZ, 22R, 22RE, 22RTE Koyo clutch release bearings offer the conventional alignment function in a lightweight, compact body.
-

$14.95
Clutch Alignment Tool and Pilot Bearing 22R/22RE This is for you guys that are buying a new engine and want to reuse your clutch. If you can’t find your alignment tool or you don’t want to fight your pilot bearing out, then this kit if for you. Clutch Alignment tool KIT with Pilot Bearing  for Toyota…
-
Sale!


$59.95 Original price was: $59.95.$45.95Current price is: $45.95.
22RE Â 1989-95 PICKUP
31410-35360
-

$14.95
Open Power Steering Idler Pulley Bearing 22R/RE This is one of the details a lot of mechanics don’t think of replacing when rebuilding a motor or just general maintenance.
-

$19.95
Sealed Power Steering Idler Pulley Bearing FITS 22R 2.4L 22RE 2.4L This is the same as open style bearing but it helps to keep out all of the dirt and debris. This is one of the details a lot of mechanics don’t think of replacing when rebuilding a motor or just general maintenance. Don’t let…
-

From: $749.95
Cylinder Head 22R/RE 1985-95  NEW complete cylinder head with all new quality parts, So this is absolutely not your typical “$299 new head”. We start with a new quality cylinder head casting and add all the goodies to create a top of line cylinder head that anyone would be proud to own! This cylinder head is completely assembled and…
-

$30.95
22RÂ 22RE 2.4L Head Bolt Set 1975-1995 Cylinder Head bolts are put through a lot of stress and re-torquing used bolts can sometimes result in failure. Â We strongly advise that you replace the head bolts whenever you remove your cylinder head to prolong the service life of your engine. Â Stock head bolts on a 20R,…
-

$205.95
ARP Head Studs 22R 22RE 22RTE Here at Yota1Â Performance we feel that durability and reliability are priority #1. Which is why we are committed to the constant Research, development and testing required to provide quality products that really work. ARP is defiantly high on our list of trusted companies that produce top quality products. If…
-

$124.95
ARP Main Stud Kit 20R 22R 22RE 22RTE 2.4L Here at Yota1Â Performance we feel that durability and reliability are priority #1. Which is why we are committed to the constant Research, development and testing required to provide quality products that really work. ARP is defiantly high on our list of trusted companies that produce top…
-

$53.95
Exhaust Manifold Hardware Kit (9 studs & 9 nuts) Your Exhaust hardware has most likely had a hard life. These are updated OEM studs and nuts that have a #8 inverted torx tip for easy installation. If you’re replacing/rebuilding the head or engine this Exhaust Manifold Hardware Kit is a must have. This kit is for…
End of content
End of content