22RE EFI Late Head Gasket Set with Cometic Head Gasket 1985-95

Description

22RE Cometic / OEM Head Gasket Set EFI 85-95

Yota1 has designed a Head Gasket Set just for you!

We have hand picked Every single gasket in this set and they are ALL OEM (except Cometic Head Gasket) We have seen every “complete” engine gasket and head gasket set on the market, most appear to be made from recycled toilet paper. Even the quality sets are very incomplete.  Here at Yota1 we ACTUALLY work on these trucks AND install these engines EVERYDAY so we know exactly what you need and what works.  I know we’ve all been elbows deep in an auto repair job when you realize your “complete gasket set” is not so complete.  I still can’t find the 12mm wrench I threw the last time this happened to me. So……. unless you have plenty of extra wrenches and enjoy “do it yourself” gasket adventures at midnight, you should probably get the Yota1 head gasket set. Don’t forget the head studs!

22RE Cylinder Head Gaskets included in this kit:

Cometic MLS (Multi Layer Steel) Head Gasket @ .040

Throttle Body

Valve Cover

2 Exhaust Donuts

EGR Cooler

Exhaust Manifold

Upper & Lower Intake

4 Valve Cover Grommets

PVC Grommet

Injector Seal Kit

Valve Stem Seals

Cold Start injector

Thermostat O-Ring

4 Copper Seal Rings for Cold Start injector

2 Copper Seal Rings for Fuel Supply at Fuel Rail

Rubber Half moons

__________

Cometic MLS (Multi Layer Steel)

Bore 95mm

Thickness .040”

MLS Head Gasket Installation Notes

1. The MSL Gasket is not designed for use on engines with O-rings or receiver grooves.

2. Always refer to the fastener manufacturer to determine accurate torque values.

3. A surface finish of 50 RA (roughness average) or finer is recommended for proper gasket seal.

4. Do not add any sealer to the Cometic Cylinder Head Gaskets, they are pre- coated with a sealant and install dry.