22R 22RE Coolant Block Off Plate Back of Timing Cover Left Side
$9.95Heater Core Block Off Plate This Water Block Off Plate is located on the back of the Timing Cover on the Exhaust Side (LEFT) 22R/RE/RTE EFI or Carb
Showing 401–440 of 448 results

Heater Core Block Off Plate This Water Block Off Plate is located on the back of the Timing Cover on the Exhaust Side (LEFT) 22R/RE/RTE EFI or Carb

Water Block Off Plate This Water Block Off Plate is Located on the Back of the Timing Cover on the Intake side (RIGHT) 20R 75-80 22R Early 81-84 22RE Late 85-95


Fuel Pump Block Plate Kit – 20R / 22R / 22RE Eliminate the mechanical fuel pump and cleanly seal the mounting location on your 20R, 22R, or 22RE engine with this Fuel Pump Block-Off Plate Kit. Ideal for electric fuel pump conversions or engine swaps, this kit provides a secure and leak-free solution when the…

TAIHO Thrust Washer Bearing Set 22R, 22RE 84-95 Avaliable in: STD .020/.50mm 4Runner 1985-95 Pickup 1984-95 If you’re interested in our OEM Complete Bearing Set, click here. Silent performance improvement Fuel consumption reduction Starter size reduction Bearing width reduction Oil cooler elimination

THROTTLE POSITION SENSOR TPS 22RE 2.4L Late 4Runner, Pickup 93-95

TOYOTA Spark Plug This is a SINGLE spark plug If you need a set of 4 spark plugs, please see our 22R 22RE 2.4L Spark Plug Set 85-95 Genuine 22R/RE 1979-1995 DENSO U-Groove spark plug provides a patented U-shaped ground electrode. This electrode was developed to meet the demand for improved ignitability, which is necessary…


22R 22RE 2.4L Spark Plug Set 79-95 Genuine SET OF 4 1979-1995 DENSO U-Groove spark plug provides a patented U-shaped ground electrode. This electrode was developed to meet the demand for improved ignitability, which is necessary for an increase of efficiency in emission gas purification and fuel consumption. The U-Groove gives the flame a groove…

Radiator Hose Kit, 22RE Toyota Pickup This kit includes 3 Hoses; UPPER, MIDDLE, & LOWER hose with (6) size #20 Hose Clamps. Fits 84-95 EFI ONLY **Some of these hoses may need to be trimmed to fit.

22R 22RE 2.4L Heater Hose Kit Toyota This hose kit consists of all 3 heater Hoses with (6) #10 Hose Clamps This kit is for pick up and 4runner WITH OUT rear heat. This hose kit does fit 4runner with rear heat but does not include any of the rear heat hoses. **Some of these hoses…

Bypass Hose Kit Toyota 22RE Late 84-88 EFI ONLY Includes: All Genuine Toyota Hoses IAC Valve to pipe IAC Valve to throttle body Throttle Body to intake by t-stat 5/8 U Hose/Pipe to bottom of intake manifold Aftermarket Clamps (6) size #4 Hose Clamps (2) size #6 clamps. Do NOT over look these hoses! You…

Bypass Hose Kit Toyota 22RE Late 84-88 EFI ONLY GENUINE TOYOTA HOSES and Aftermarket Clamps Do NOT over look these hoses! You should replace your radiator hoses every few years, well you should be replacing these also. These hoses are part of the same cooling system and have been seen in so many engines laid…

Bypass Hose Kit Includes: Throttle Body to intake Throttle Body to pipe 5/8 U Hose Aftermarket Clamps (4) size #4 Hose Clamps (2) size #6 clamps Toyota 22RE 2.4L Late 89-95 DO NOT OVER LOOK THESE HOSES!!!! You replace your radiator hoses every few years, well you should be replacing these also. These hoses are…

Genuine Toyota 22RE 2.4L Bypass Hose Kit – 1989–1995 EFI OnlyCritical Cooling System Maintenance – Don’t Overlook These Hoses! Ensure the long-term reliability of your 1989–1995 Toyota 22RE 2.4L EFI engine with the Genuine Toyota Bypass Hose Kit. This complete kit includes all the necessary hoses and clamps to replace vital bypass hoses in your…


BANDO Power Steering Drive V-Belt 22R & 22RE PICKUP 1979-95 4RUNNER 1984-95 The Bando Drive Belt is precision engineered for long life under severe operating conditions and meets or exceeds the vehicle manufacturer’s specifications for quality, fit and performance.


OEM Resurfaced Flywheel 8 7/8″ flywheel fits 1975-92 2×2 & 4×4 22R 22RE non turbo pickups & 4Runners This OEM Resurfaced Flywheel is a Factory Toyota Flywheel that is cleaned, bead blasted, resurfaced & ready for another 30 years. **This item has a Core Charge of $50. You can pay it now and return…

22R 22RE 2.4L Oil Pump Drive Gear (single row timing only) THIS IS THE LONGER DRIVE GEAR FOR 22R ENGINES WITH SINGLE ROW TIMING KIT THIS GEAR IS 43MM 1.700″ FITS: 84-95 22R/RE/RTE WITH 98 OR 96 LINK SINGLE WIDE TIMING CHAIN IF YOU NEED THE 30MM (1.200″) DRIVE GEAR FOR 22R/RE/RTE WITH DUAL ROW…

OEM Oil Pump Drive Gear 1.200″ long (dual row timing only) 75-82 This is the short oil pump drive gear used on 75-82 20R, 22R and 83-95 engines that have been converted to dual row timing. Also used in the dual row conversion kit on 85-95 22R/RE

Ignition Wire Set DENSO 22R 22RE 1981-1992 The Denso First Time Fit ignition wire sets are identical in form, fit, color and performance to the factory-installed wire sets. Every part of each wire sets construction meets or exceeds OE/OES specifications. The Denso 7 and 8mm ignition wires are SAE J2031 Class E rated, the highest quality wire…

Ignition Wire Set 22R 22RE 1993-1995 The Denso First Time Fit ignition wire sets are identical in form, fit, color and performance to the factory-installed wire sets. Every part of each wire sets construction meets or exceeds OE/OES specifications. The Denso 7 and 8mm ignition wires are SAE J2031 Class E rated, the highest quality wire used…

Genuine Toyota Intake Boot to Mass Air Flow Clamp – 22R / 22RE 2.4L (1985–1995)Genuine Clamp for Secure MAF-to-Intake Boot Connection Ensure a tight, leak-free seal between your intake boot and mass air flow (MAF) meter with this Genuine Toyota Clamp. Specifically designed for 22R and 22RE 2.4L engines, this clamp maintains proper airflow readings…


22RE 2.4L Air Intake Hose to Throttle Body Genuine Toyota Boot Fits: 1984-08/1988 4Runner 08/1983-08/1988 Pickup If your intake boot is ripped or hard its not sealing properly. When cracked they let in un-metered air causing rough run due to running lean. Check for the cracks in the “low spots” of the accordion (especially on the…

NGK Ignition Wire Set 22RE 1993-1995 NGK Resistor Spark Plug Wire Sets utilize a construction method known as variable pitch wire winding to create resistance to radio frequency interference.The variable pitch winding (loose/tight/loose) provides suppression throughout a very wide range by scrambling and breaking up the electrical waves radiated by the firing of the spark plugs….


OEM Number 16210-38022

Yota1 Pro Clutch Kit, 8 7/8 22R 22RE 81-92 non turbo OE Factory Clutch Replacement Includes Clutch Cover Assembly (Pressure Plate), Clutch Disc, & Disc Spring Damper The EXEDY Pro-Kit clutch assembly you will receive is manufactured on the same production line as OEM clutch components! Fits Toyota 1981-1995 2WD, 1981-1992 4WD with a 22RE…

EXEDY OEM Pro Clutch Kit The EXEDY Pro-Kit clutch assembly you will receive is manufactured on the same production line as OEM clutch components! This Clutch Kit can be an upgrade to any 22R/RE. This Clutch Kit will need to be installed with a 9.25″ Flywheel. Fits: Toyota 1985-1988 22RTE Toyota 1993-1995 22RE Clutch cover…

Genuine Toyota Distributor Rotor Fits All Toyota R Series Engines 20R 2.2L 22R 2.4L 22RE 2.4L 1975-1995


22RE 2.4L Distributor Cap YEC 1992-1995 4Runner, Pickup Fits: 08/1992-11/1995 4Runner 22RE 2.4L 08/1992-11/1995 Pickup 22RE 2.4L MADE IN JAPAN 19101-35010


Factory Genuine Toyota Distributor Cap Toyota 22R, 22RE Manufactured year 04/1984-08/1988 19101-35180 19101-35120 **the Image may differ from the actual cap, the hardware on this item is not black.

Distributor Cap for Toyota 22R / 22RE 2.4L Engines (08/1982 – 08/1992) This high-quality distributor cap is designed for Toyota vehicles equipped with 22R and 22RE 2.4L 4-cylinder engines, manufactured between 08/1982 and 08/1992. It ensures reliable ignition performance and precise fitment, helping to maintain smooth engine operation and efficient combustion. Fits: Toyota 22R and…

22R 22RE 22RTE 2.4L Dipstick Genuine 1985-1995 These dipsticks tend to wear out and not fit in the tube properly, so here’s a new one. NOTE: The dipstick for the 81-84 (tall block) is discontinued, the 85-95 dipstick works as long as you have the matching tube and clamp. We have the kit available as…

Crankshaft Key For Timing Gear, Balancer Pulley, Oil Pump, anything driven off the Crankshaft 20R 75-80 22R 81-84 22R 85-95

Auxiliary Air Valve Gasket Factory Toyota 22RE SKU 22215-35270 4Runner 90-95 Pickup 89-95

BANDO Alternator/Fan Drive V-Belt 22R 2.4L 22RE 2.4L PICKUP 1975-95 4RUNNER 1985-95 9.5 x 875 The Bando Drive Belt is precision engineered for long life under severe operating conditions and meets or exceeds the vehicle manufacturer’s specifications for quality, fit and performance.


Auxiliary Air Valve with gasket. This item does not include the bolts. You will need: 3 of Idle Air Control Valve Screw With Washer Genuine 1992-2004 1 of 22R 2.4L 22RE 2.4L Idle Air Control Valve Screw with washer Genuine 1989-1995 Fits: 08/1988-11/1995 4Runner 22RE 2.4L 08/1988-11/1995 Pickup 22RE 2.4L 22230-35030



Genuine No. 83420-16040

22RE 2.4L 1FZ 4.5L Water Temp Sender 22RE 1992-1995 4Runner & Pickup 1FZ 4.5L 1992-1997 Land Cruiser 3VZ 1988 Genuine Toyota Part

Genuine Toyota Coolant Temperature Sensor for ECM (Engine Control Module) This genuine Toyota sensor provides accurate coolant temperature readings directly to the Engine Control Module (ECM), ensuring optimal engine performance and efficient fuel management. For Electronic Fuel Injection (EFI) models only. Compatible with the following Toyota engines: 22RE (Late 1988–1995) 22RTE (1988) 2RZ (1995–2004) 3RZ…


22RE Late 1988-95
22RTE 1988
3VZ 1988-04
5VZ 1995-2002
End of content
End of content
WARNING: This product can expose you to chemicals, which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov.