22R 2.4L 22RE 2.4L Triple Wire Spark Plug Wire Clamp Genuine
$4.99This wire clamp separator fits Factory Ignition wires for a
22R 2.4L
22RE 2.4L
1981-1992
Showing 201–240 of 300 results

This wire clamp separator fits Factory Ignition wires for a
22R 2.4L
22RE 2.4L
1981-1992

Throttle Body to Intake Double Ended Stud Genuine Fits: 1988-1995 Pickup 1988-1995 4Runner

Throttle Body to Intake Manifold Hardware Kit This is an all Genuine Toyota Hardware Kit (1) Stud Bolt (3) Throttle Body to Intake Manifold Bolt with Washer (1) Nut Fits: 1988-1995 Pickup 1988-1995 4Runner

Throttle Body to Intake Nut Genuine Fits: 1988-1995 Pickup 1988-1995 4Runner


Genuine Toyota Oil Filler Cap Fits: 22R 2.4L 22RE 2.4L 22RTE 2.4L B 3.0L 3B 3.4L

Genuine Toyota Oil Filler Cap Fits: 22R 2.4L 22RE 2.4L 22RTE 2.4L B 3.0L 3B 3.4L


Toyota Hood Rod Clip Holder Genuine 1971-2004 Fits: 1971-1990 Land Cruiser 1984-2002 4Runner 1984-1995 Pickup 1996-1998 T100 1995-2004 Tacoma Genuine Toyota Part

22R 2.4L 22RE 2.4L 3VZ 3.0L Coolant Reserve Breather Hose Genuine 1984-1995 22R 22RE 2.4 L 1984-1995 3VZ 3.0L 1988-1995 Application: From Coolant Overflow Reservior to Radiator Genuine Toyota Part


PCV Breather Hose Genuine Toyota 08/1985-11/1995 4Runner 08/1985-11/1995 Pickup Application: Rear of valve cover, hose goes from the PCV Valve to the Intake Plenum. If you’re looking for the Breather hose at the front of the valve cover, click here. 12261-35011

Transmission Control Cable Bracket Bolt Genuine 1979-2020 Fits: 1995-2016 Tacoma 1GR 4.0L 2RZ 2.4L 3RZ 2.7L 5VZ 3.4L 1993-1998 T100 3RZ 2.7L 3VZ 3.0L 5VZ 3.4L 1979-1995 Pickup 20R 2.2L 22R 2.4L 22RE 2.4L 22RTE 2.4L 3VZ 3.0L 1985-2020 4Runner 1GR 4.0L 22R 2.4L 22RE 2.4L 22RTE 2.4L 3RZ 2.7L 3VZ 3.0L 5VZ 3.4L Genuine…

22RE 2.4L 22RTE 2.4L Upper Intake Plenum Gasket OEM Fits: 1987-1995 Pickup/4Runner 22RE 2.4L EFI 22RTE 2.4L

Water Pump Assembly Bolt Genuine 1979-1995 22R 2.4L 22R 2.4L 22RTE 2.4L This is a M6 Bolt Genuine Toyota Part

Water Pump Bolt Kit 22R 22RE 22RTE 1981-1995 (8) 6mm x 1.00 x 25mm (1) 8mm x 1.25 x 80mm


Oil Pan Drain Plug Gasket OEMÂ 4Runner 1984 Pickup 1975-1985 22R 22RE 22RTE Land Cruiser 1983-1986 Celica 1975-1988 LARGE Fits (with 18mm bolt) Please check your oil pan, some oil pans have been switched throughout the years. Â

This 22RE Stage 1 Crawler Camshaft EFI is perfect for a stage 1 22RE EFI crawler build / 4×4 Pickup or 4Runner.

This cam is for all you die hards that run the toughest trails out there and then drive your rig to work the next day.

This cam is for all you crazy Stage 3 / Turbo / Nitrous guys!!

Item pictured, product may vary


22R 22RE 22RTE Engine Coolant Thermostat Genuine 1978-1995 Engine Coolant Thermostat that fits and works like it should. Fits: 1984-11/1995 4Runner 22R 2.4L 22RE 2.4L 22RTE 2.4L 08/1978-12/1985 Celica 20R 2.2L 22R 2.4L 22RE 2.4L 01/1979-11/1995 Pickup 20R 2.2L 22R 2.4L 22RE 2.4L 88°C/191°F Genuine Toyota Part We recommend to replace your thermostat whenever you…

OEM Engine Coolant Thermostat – 88°C / 191°F (22R, 22RE, 22RTE) | 1976–1995 Toyota Applications Keep your engine running at optimal temperature with this OEM Engine Coolant Thermostat, designed to fit and function just like the original part. This thermostat is a direct replacement for Toyota 22R, 22RE, and 22RTE engines, offering reliable performance and…

OEM Toyota Rear Main Seal fits 1975-1995 4 cyl 20R, 21R, 22R, 22RE, 22RTE It’s not uncommon for these rear main seals to go 250,000 miles. Your time is valuable, why chance it with a cheap after market seal that’s doomed to fail in 20,000-30,000 miles? Or worse, IT MIGHT NOT WORK AT ALL!

Adjustable Cam Gear Single Row 22R, 22RE, 22RTE An adjustable cam gear is the best way to get every last drop of power out of a performance camshaft, It is also the only way to correct valve timing on an engine that has the head or block milled. This gear allows a full 20 degrees of…

Adjustable Cam Gear Dual Row 22R, 22RE, 22RTE An adjustable cam gear is the best way to get every last drop of power out of a performance camshaft, It is also the only way to correct valve timing on an engine that has the head or block milled. This gear allows a full 20 degrees of…


OEM Crankshaft kit with King bearings 75-95 20R 22R 22RE 22RTE This is a Genuine OEM Crankshaft kit with King bearings, they have been thoroughly inspected and cleaned, Crankshafts that meet our standards are then turned to the next size and micro-polished. This kit Includes Rod, Main, Thrust bearing set (King) 4 new oil galley…

Total Seal Gapless Piston Rings TOYOTA 22RE 1985-1995 Installation instructions FEATURE BENEFITS: Increased horsepower and torque Longer engine life Saves money (fewer teardowns) Improved consistency Longer ring life Better oil control Less Friction Increased intake signal Wider torque curve More engine vacuum


Eagle H-Beam Connecting Rods Fits: 20R 2.2L 22R 2.4L 22RE 2.4L 22RTE 2.4L Each rod is multi-stage heat-treated, X-rayed, sonic-tested, magnafluxed,100 percent machined, and then shot-peened to stress-relieve the metal. The rods have precision cap alignment sleeves to positively locate each rod cap, silicon bronze bushings. SHIPS IN 3-5 BUISNESS DAYS!

Remanufactured Connecting Rod Set – 20R / 22R / 22RE / 22RTE (1978–1995) | 2.4L EnginesIncludes Resized Big Ends & New Pin Bushings | $50 Core Charge Restore factory performance and reliability with this remanufactured connecting rod set, professionally reconditioned. Designed for Toyota 20R, 22R, 22RE, and 22RTE 2.4L engines, these rods are ideal for…

Hastings Chromoly Piston Ring Set 22R 22RE 22RTE 22R 1981-1984 Dome Pistons 22R 22RE 22RTE 1985-1995 Available in Std, . .50mm or .020 .75mm or .030 1.00mm or .040 1.5mm or .060


20R 22R/RE/RTE Rocker Arms Set of 8 We always recommend replacing rocker arms anytime the camshaft is replaced. If all you need is the adjuster screws. They are aluminum rocker arms and can be used as an upgrade to the early 22R steel rockers, they are a direct fit. See below if you are only looking to…

20R 2.2L 22R 22RE 22RTE 2.4L Rocker Arm Adjusting Screw Genuine (Set of 8) 1975-1995 20R 22R/RE/RTE When you want to replace all your adjuster screws, we have the kit for you. 8 Genuine Adjuster screws

ARP Rod Bolt Kit 22R 22RE 22RTE Here at Yota1Â Performance we feel that durability and reliability are priority #1. Which is why we are committed to the constant Research, development and testing required to provide quality products that really work. ARP is defiantly high on our list of trusted companies that produce top quality products….

OEM Complete Bearing Set – TaihoFits: Toyota 21R, 22R, 22RE (1982–1995) Rebuild your Toyota engine with confidence using this OEM Taiho Complete Bearing Set, engineered for the 21R, 22R, and 22RE engines. This set provides everything needed for a reliable and precise bottom-end refresh, with Taiho’s renowned Micro-Grooved Bearing (MGB) technology built in for superior…

OEM Rod Bearing Set – 18R / 20R / 21R / 22R / 22RE / 22RTE (1982–1995)Fits: Toyota Pickup (1975–1995), 4Runner (1985–1995) Restore factory-spec performance with this OEM Rod Bearing Set, engineered for the legendary Toyota 22R, 22RE, and 22RTE engines. Includes: Complete OEM Rod Bearing Set Compatible with both Pickup and 4Runner models from 1982 to 1995…

OEM Main Bearing Set – 22R / 22RE / 22RTE (1982–1995)Fits: Toyota Pickup (1982–1995), 4Runner (1984–1995) Restore factory-spec performance with this OEM Main Bearing Set, engineered for the legendary Toyota 22R, 22RE, and 22RTE engines. Includes: Complete OEM Main Bearing Set Compatible with both Pickup and 4Runner models from 1982 to 1995 Available Sizes: Please…

TO11K

1985-1995 4Runner
1985 Celica
1985-1995 Pickup

1985-1995 4Runner
1985 Celica
1985-1995 Pickup

22R 22RE 22RTE 2.4L Rear Main Housing Bolt Genuine 1975-1995 These are individual bolts Genuine Toyota Parts
End of content
End of content
WARNING: This product can expose you to chemicals, which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov.