Forward 4 Inch Shift Transfer Case RF1A Reman with OEM Components

$1,074.95

-

10 Day Lead Time

This will also add the following products to your cart:

  • REFUNDABLE CORE CHARGE + $350.00 - $350.00

The Yota1 Promise!

  • Check Mark Satisfaction Guaranteed
  • Check Mark Secure Payments
  • Check Mark The Best In The Business
SKU: RF1A_Top-Shift-TG-1-1 Categories: , ,

Description

RF1A Forward 4 Inch Shift Transfer Case Remanufactured

This transfer case is remanufactured with all OEM Components. It uses Genuine Toyota Seals, OEM low-speed gear, OEM high-speed gear, OEM countershaft, OEM input shaft, Koyo Bearings, and Triple Drilled Flanges.

All transfer case pieces are glass beaded and all surfaces are machined flat, to ensure a perfect seal.

*The 23-spline output shaft is intended to be used behind an R151 as a single case or the rear case in a dual case application.*

This Transfer Case Does NOT include a Shifter

$350 Core Charge

1 Year Warranty

10 Day Lead Time

Identifying the RF1A

You are able to identify if you have an RF1A transfer also known as the Toyota Gear Driven case by the number of bolts on the back case cover. If you have 7 bolts on the cover you have an RF1A, Gear Driven case. If you only have 5 bolts then you have a chain driven case.

Difference between Top and Forward Shift Transfer cases

The Differences between Top Shift and Forward shift is fairly self explanatory. A Top Shift RF1A will have the shifter directly on top of the reduction box and alternatively a forward shift RF1A will have shift rails extending out the front with a block off plate on top of the reduction box.

Top Shift Transfer Cases
1979- 7 of 1983 Pick-Up/Hilux
1985-1988 Pick-Up/Hilux
1985-1989 4Runner

Forward Shift 4″ Transfer Cases
1989-1995 Pick-Up/Hilux
1990-1993 4Runner

Forward Shift 4.5″ Transfer Cases
8 of 1983-8 of 1988 Pick-Up/Hilux and 4Runner
1986-1987 Pick-Up/Hilux and 4Runner

Spline Information

For stock applications the only transfer cases that used 23 spline are the 1986 and 1987 Turbo trucks and 4Runners. All other stock 1979-1995 trucks and 4Runners used the 21 spline. If you are build a dual case set up or custom application the 23 spline output shaft is stronger than the 21 spline. However it is important to know your application to be sure it will work in your attend application.

Core Charge

**THESE TRANSFER CASES HAVE A 10 DAY DAY LEAD TIME. WE ARE CUSTOM BUILDING THEM FOR YOUR VEHICLE. DUE TO ALL THE VARIATIONS AVALIBLE, ONCE THE ORDER HAS BEEN PLACED, THERE IS NO CANCELATION OF THIS ORDER. THERE ARE NO EXPECTIONS TO THIS POLICY!
There is a Core Charge of $350 PER Transfer Case. The Core charge will be added to your cart.  We will send a return label for your core Transfer Case at the cheapest available shipping.  After we receive and inspect the core, your core charge will be returned minus the return shipping within 45 days. Please note that core charges are refunded via Check to the mailing address on file.
**PLEASE NOTE THAT THE CORE TRANSFER CASE CAN NOT HAVE ANY INTERNAL HARD PART DAMAGE, HAVE EXCESSIVE RUST AND MUST BE REBUILDABLE TO RECEIVE A FULL CORE REFUND. PLEASE EMAIL US A PICTURE OF THE CORE IF YOU HAVE ANY CONCERNS OF IT’S CONDITION.

Additional information

Weight 75 lbs
Dimensions 16 × 16 × 16 in
Gear Ratio

2.28

Input Spline

21

Additional Options

Installed Interlock Pin for Standard Shifter, Twin Stick Ready No Interlock Pin

Make Model Year
Make Model Year
Toyota 4Runner 1990 - 1993
Toyota Pick-Up/Hilux 1989 - 1995

You may also like…