SERVICES

Building Engines has always been our primary focus, but that’s not all we do.  Yota1 has 5 departments, Engines, Transmissions, Gears, Auto Repair, and our rapidly expanding Parts Department. Our goal is to provide a “one stop solution” for Toyota enthusiasts around the world. We want to be your “go to guys” for all of your Toyota parts. We have thousands of part numbers in stock and our inventory is growing everyday. We are constantly testing and adding new parts. We stock many hard to find parts, but not everything we have is online. So if you don’t see what you’re looking for, or have a suggestion on a part you would like to see on our website, please don’t hesitate to reach out to us. We support about 20 different Toyota engines from the mid 70’s 20R to the current 1GR and 2TR. Most of our products are built “In House” including Engines, Manual Transmissions, Transfer cases, and Differentials. We will install just about anything we build. Engine and Transmission installs, Engine swaps, Lift kits, and solid Axle Swaps are an everyday thing in our shop. We can lift, lower, Re-power, and Re-gear just about anything. We know that a lot of you are not local to us and probably can’t drop your vehicle off, but some of you can. Here are some basic Services we provide at Yota1 Performance Engine & Machine.

ENGINE INSTALLS

This is a Labor Price ONLY, it does not include any accessories or fluids.  It is very common that you will need around $200-$500 in additional parts such as Clutch kit, Radiator, Spark Plugs, Oil, Oil Filter, Coolant, Thermostat, Water Pump, Fuel Filter, Belts, and Hoses, etc.  Please keep this in mind when pricing your engine & install. Here are the approximate cost for some of the engine installs we do.

If you don’t see your engine, just give us a call.

22R/22RE 2.4L                $1350 labor only

3VZ/ 3.0L                          $1700 labor only

2RZ/2.4L                           $1500 labor only

3RZ/2.7L                           $1500 labor only

5VZ/3.4L                           $1600 labor only

1GR/4.0L                          $2500 labor only

1FZ-FE /4.5L                    $3200 labor only

3F-E / 4.0L                        $2700 labor only

2UZ / 4.7L                         $2500 labor only

SERVICES

Building Engines has always been our primary focus, but that’s not all we do. Yota1 has 5 main departments, Engines, Transmissions, Gears, Auto Repair, and our rapidly expanding Parts Department. Our goal is to provide a “one stop solution” for Toyota enthusiasts around the world. We want to be your “go to guys” for all of your Toyota parts. We have thousands of part numbers in stock and our inventory is growing everyday. We are constantly testing and adding new parts. We stock many hard to find parts, but not everything we have is online. So if you don’t see what you’re looking for, or have a suggestion on a part you would like to see on our website, please don’t hesitate to reach out to us. We support about 20 different Toyota engines from the mid 70’s 20R to the current 1GR and 2TR. Most of our products are built “In House” including Engines, Manual Transmissions, Transfer cases, and Differentials. We will install just about anything we build. Engine and Transmission installs, Engine swaps, Lift kits, and solid Axle Swaps are an everyday thing in our shop. We can lift, lower, Re-power, and Re-gear just about anything. We know that a lot of you are not local to us and probably can’t drop your vehicle off, but some of you can. Here are some basic Services we provide at Yota1 Performance Engine & Machine.

ENGINE INSTALLS

This is a Labor Price ONLY, it does not include any accessories or fluids.  It is very common that you will need around $200-$500 in additional parts such as Clutch kit, Radiator, Spark Plugs, Oil, Oil Filter, Coolant, Thermostat, Water Pump, Fuel Filter, Belts, and Hoses, etc.  Please keep this in mind when pricing your engine & install. Here are the approximate cost for some of the engine installs we do.

If you don’t see your engine, just give us a call.

22R/22RE 2.4L                $1350 labor only

3VZ/ 3.0L                          $1700 labor only

2RZ/2.4L                           $1500 labor only

3RZ/2.7L                           $1500 labor only

5VZ/3.4L                           $1600 labor only

1GR/4.0L                          $2500 labor only

1FZ-FE /4.5L                    $3200 labor only

3F-E/ 4.0L                         $2700 labor only

2UZ/4.7L                           $2500 labor only

TRANSMISSIONS

These are Labor Prices ONLY, and do not include any fluids. We re-build all Manual Transmissions and usually have the Toyota W55, W56, W56C, G54, R150, R151, and L52 Series Transmission in Stock.  We also Install these in our shop. Here is a list of Labor costs to install some of the common transmissions.

L52              $450 plus Fluids

W55             $400 plus Fluids

W56             $450 plus Fluids

W56C          $450 plus Fluids

R150            $450 plus Fluids

R151            $450 plus Fluids

R154           $500 plus Fluids

SOLID AXLE SWAPS  (86-95 pick-up & 4runner)

We do a lot of Solid Axle Swaps (SAS)

We usually always have solid front axles available for $600 complete hub to hub including 3rd member (usually 4:10)

These are typical costs for a solid axle swap and related services, tax will be added to all parts.

$600 used complete front axle

$400 Axle rebuild. Disassemble, clean, remove all unneeded brackets, grind smooth, paint, and reassemble front axle with parts from IFS eliminator kit. The 3rd member will be removed from the axle during this process, so now would be a great time to install gears and lockers, or add chromo shafts. Bench labor costs to install gears and lockers are listed below in the differential section.

$1325 IFS eliminator kit

$1300 Install IFS eliminator kit includes: Remove all IFS and unneeded brackets, grind smooth and paint. Install front hanger, frame tubes, front axel, and all parts from IFS kit with the exception of the axle rebuild parts (see axle rebuild above for cost and details).

$250 Extend front drive line and install 12” spline  (part # 100131-1-kit) Does not include the spline kit, U-joints or flanges.  We can balance your front driveline if you need, the cost is $100

DIFFERENTIAL

We do gear installs on most vehicles, please call for pricing on your specific vehicle.

3rd member set up charges are for bench labor only, and do not include labor to remove and reinstall 3rd members into the vehicle.

We regularly have gear and locker specials, usually on Toyota 8″ standard rotation. You can check the differential parts section for part pricing and specials.

7.5″  Toyota $350 bench labor

8″    Toyota $350 bench labor

8.4″ Toyota $375 bench labor

8″    Toyota E-locker  $425 bench labor

9.5″ Toyota $500 bench labor

9″     Ford     $450 bench labor

ARB locker install on any of the 3rd’s above add $105

TRANSMISSIONS

These are Labor Prices ONLY, and do not include any fluids. We re-build all Manual Transmissions and usually have the Toyota W55, W56, W56C, G54, R150, R151, and L52 Series Transmission in Stock.  We also Install these in our shop. Here is a list of Labor costs to install some of the common transmissions.

L52              $450 plus Fluids

W55             $400 plus Fluids

W56             $450 plus Fluids

W56C          $450 plus Fluids

R150            $450 plus Fluids

R151            $450 plus Fluids

R154           $500 plus Fluids

SOLID AXLE SWAPS  (86-95 pick-up & 4runner)

We do a lot of Solid Axle Swaps (SAS)

We usually always have solid front axles available for $600 complete hub to hub including 3rd member (usually 4:10)

These are typical costs for a solid axle swap and related services, tax will be added to all parts.

$600 used complete front axle

$400 Axle rebuild. Disassemble, clean, remove all unneeded brackets, grind smooth, paint, and reassemble front axle with parts from IFS eliminator kit. The 3rd member will be removed from the axle during this process, so now would be a great time to install gears and lockers, or add chromo shafts. Bench labor costs to install gears and lockers are listed below in the differential section.

$1325 IFS eliminator kit

$1300 Install IFS eliminator kit includes: Remove all IFS and unneeded brackets, grind smooth and paint. Install front hanger, frame tubes, front axel, and all parts from IFS kit with the exception of the axle rebuild parts (see axle rebuild above for cost and details).

$250 Extend front drive line and install 12” spline  (part # 100131-1-kit) Does not include the spline kit, U-joints or flanges.  We can balance your front driveline if you need, the cost is $100

DIFFERENTIAL

We do gear installs on most vehicles, please call for pricing on your specific vehicle.

3rd member set up charges are for bench labor only, and do not include labor to remove and reinstall 3rd members into the vehicle.

We regularly have gear and locker specials, usually on Toyota 8″ standard rotation. You can check the differential parts section for part pricing and specials.

7.5″  Toyota $350 bench labor

8″    Toyota $350 bench labor

8.4″ Toyota $375 bench labor

8″    Toyota E-locker  $425 bench labor

9.5″ Toyota $500 bench labor

9″     Ford     $450 bench labor

ARB locker install on any of the 3rd’s above add $105


 Yota1 Performance, Inc. is NOT affiliated with TOYOTA Corporation.